48 Stud Pattern For 121 Track

48 Stud Pattern For 121 Track – The amount of studs to be used on a 121 track depends on the power your snowmobile makes. There's 48 spaces between lugs in a 121 track. You could go 4+2 which is 4 per row on double backers than 2 per row on double backers rotation back and forth all in the center belt. Smaller and narrower tracks may.

There are typically 96, 120, or 144 studs in a 121” snowmobile track. Carbide tips penetrate the terrain and protect the stud. A 3 studs per row pattern is 144 studs. You could try going on the.

48 Stud Pattern For 121 Track

I am torn between 96, 120 or 144, all up. Studding template for 121 in. Shop all trail studs use our hookup guide.

Hi, wondering what is the track size for a 93 indy efi & where to find a track stud pattern template for down the middle. The calculation is as follows: 121 inch track has 48 pitches, you can make the v have as many as you want, but make it divide evenly into 48 to get an even pattern.

#1 · oct 12, 2008. To create the 144 stud pattern on a 14 x 121″ track, move the template and mark the pattern 8 full repeats of the pattern, moving the template 16 times. Wider and longer tracks have more surface area and, therefore, can accommodate more studs.

Each panel has a left outside band on the left side of the hyfax, a center band between the hyfax, and a right outside band on the right side of the hyfax. Riders can install anywhere from 168 to 240 studs on such tracks. Dan, you should at least try to go 2 per bar, which is 96 studs however your could get by with 1 per, which would be 48 on a 121 track.

SNOWMOBILE STUD PATTERNS « Free Patterns